Home > Pontiac > Aztek > 2004 >

NEW 2004 Pontiac Aztek Keyless Entry Key Fob Remote 4BTN Free Programming Inst
New Keyless Entry Remote Key Fob For a 2004 Pontiac Aztek w/ Programming
 
Alternative Views:


List Price: $99.95
Our Price: $17.77
Savings: $82.18
FCCID: L2C0007T L2COOO7T
Battery Size CR2032
Notice: 9364556-4575 and 10335582-88
Note: Batteries sold separately

Quantity in Stock:9

Availability:: Ships Next Business Day
Product Code: 2004-PONTIAC-AZTEK-4B-07T-FOB
Qty:

 
 
THIS IS A BRAND NEW REMOTE.  ALL OF OUR ITEMS HAVE BEEN TESTED AND WE OFFER A 100% MONEY BACK GUARANTEE, SO PURCHASE WITH CONFIDENCE AND NO RISK!

VEHICLE:  2004 PONTIAC AZTEK 
PROGRAMMING INSTRUCTIONS:  GOOD NEWS!  THIS REMOTES IS SELF-PROGRAMMABLE, NO PROFESSIONAL NEEDED.  PLEASE SEE BELOW FOR COMPLETE PROGRAMMING INSTRUCTIONS
WE HAVE PHONE SUPPORT:  402-964-2720
This is a Brand New Keyless Entry Remote KEY FOB for a 2004 Pontiac Aztek. This Key FOB fits many other vehicles, please see listing for list of compatible vehicles.  Please make sure your remote looks like the picture above. 
  • Please also note you will need to program the remote to your vehicle, the remote will not just show up and work.  The programming instructions for a 2004 Pontiac Aztek are below. 
     
  • We ship United State Postal Service First Class mail and have items shipped within 1 business day. Please email with questions. 100% Money Back Guarantee!
  •   

    PROGRAMMING INSTRUCTIONS FOR 2004 PONTIAC AZTEK

    Obtain all remote transmitters for this vehicle.

    1. Close all doors.

    2. Insert key into the ignition cylinder but do not turn it.

    3. Press and hold the Unlock button on door lock switch on drivers door. 
        Hold until instructed to release in step 6.

    4. Remove key from ignition and then insert key into ignition without turning ignition cylinder and remove key.

    5. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.
        
    6. Release door lock switch on drivers door panel.
        A Chime will sound 3 times indicating that you are in programming mode.

    7. Press both the Lock and Unlock buttons on the remote up to 30 seconds. 
        A chime will sound 2 times if remote has programmed successful.

    8. Repeat step 7 if you are programming additional remotes.

    9. Remove key from ignition to exit programming mode.

    NOTE: If you are having trouble getting this procedure to work, we have found that some vehicles need step 3 to be done before step 2.


 



Share your knowledge of this product. Be the first to write a review »