Home > Infiniti > Q45 > 2005 >

NEW 2005 Infiniti Q45 Keyless Entry Key Fob Remote 4BTN Free Programming
New Key Fob Remote For a 2005 Infiniti Q45 w/ 4 Buttons & Programming
 
Alternative Views:


List Price: $89.95
Our Price: $19.77
Savings: $70.18
FCCID: Model / FCC ID: KBRASTU15
Battery Size CR2025
Note: Batteries sold separately

Quantity in Stock:6

Availability:: Ships Next Business Day
Product Code: 2005-INFINITI-Q45-STU154B-FOB
Qty:

 
 
THIS IS A BRAND NEW REMOTE.  ALL OF OUR ITEMS HAVE BEEN TESTED AND WE OFFER A 100% MONEY BACK GUARANTEE, SO PURCHASE WITH CONFIDENCE AND NO RISK!

VEHICLE:  2005 INFINITI Q45   
PROGRAMMING INSTRUCTIONS:  GOOD NEWS!  THIS REMOTE IS SELF-PROGRAMMABLE, NO PROFESSIONAL NEEDED.  PLEASE SEE BELOW FOR COMPLETE PROGRAMMING INSTRUCTIONS
KEY FOB INCLUDES NEW BATTERY
WE HAVE PHONE SUPPORT:  402-964-2720
This is a Brand New Keyless Entry Remote KEY FOB for a 2005 Infiniti Q45.  This Key FOB fits many other vehicles, please see listing for list of compatible vehicles.  There are two different versions of this key fob, a 3 Button and a 4 Button version.  If your current key fob is the 3 button version this key fob WILL NOT work with your vehicle.  You will require a different key fob. 
  • Please also note you will need to program the remote to your vehicle, the remote will not just show up and work.  The programming instructions for a 2005 Infiniti Q45 are below. 
     
  • We ship United State Postal Service First Class mail and have items shipped within 1 business day. Please email with questions. 100% Money Back Guarantee!

  • PROGRAMMING INSTRUCTIONS FOR 2005 INFINITI Q45

    You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.

     

    1. Close and lock all doors with the driver's side power lock / unlock switch located on drivers door panel.                                                                                                                                                                                                                        
    2. Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). Your hazard lamps will flash if you have performed this step correctly. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.                                                                                                                                                   
    3. Insert key into ignition and turn to the ACC position.                                                                                        
    4. Within 5 seconds, push ANY button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.                                                                                                                                                                  
    5. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press ANY button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).                                                                                                                                                                      
    6. when all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver?s side power lock/unlock switch and open the driver side door. Test all remotes.



Share your knowledge of this product. Be the first to write a review »