New Key Fob Remote For a 2005 Nissan Titan w/ 3 Buttons & Programming

Home > Nissan > Titan > 2005 >

Alternative Views:

Our Price: $19.77

FCCID: KBRASTU15
Battery Size CR2025
Note: Batteries sold separately

Quantity in Stock:(Out of Stock)

Availability:: Ships Next Business Day
Product Code: 2005-NISSAN-TITAN-STU153B-FOB

Qty:

Item Specifics

Compatible with: 2005 Nissan Titan

Bring your 2005 Nissan Titan out of the dark ages and back into the modern era!

Key fob, car remote, clicker thingy, key bob… We've heard it called just about everything under the sun. No matter what you call it, one thing is certain: life is just a little bit sweeter when you can lock and unlock your car with the push of a button. Let's face it, it's the 21st Century and no one has time to fumble with caveman technology trying to stick a key into a lock to get into their car. Once you receive your new key fob simply program it to your vehicle and you'll be sliding in and out of your car with ease just like the rest of the cool kids.

Questions?

Programming Instructions

2005 NISSAN TITAN

You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.

1. Close and lock all doors with the driver's side power lock / unlock switch located on drivers door panel.

2. Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). Your hazard lamps will flash if you have performed this step correctly. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.

3. Insert key into ignition and turn to the ACC position.

4. Within 5 seconds, push ANY button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.

5. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press ANY button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).

6. when all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver�s side power lock/unlock switch and open the driver side door. Test all remotes.