Home > Buick > Rainier > 2007 >

NEW Keyless Entry Key Fob Remote For a 2007 Buick Rainier 3 BTN
NEW Keyless Entry Key Fob Remote For a 2007 Buick Rainier 3 BTN
 
Alternative Views:


List Price: $89.95
Our Price: $19.77
Savings: $70.18
FCCID: 15051014 15008008 15008009
Battery Size CR2032
Note: Batteries sold separately

Quantity in Stock:4

Availability:: Ships Next Business Day
Product Code: 2007-BUICK-RAINIER-3BMYT3-FOB
Qty:

 

 



Item Specifics

Compatible with: 2007 Buick Rainier 

Bring your 2007 Buick Rainier out of the dark ages and back into the modern era!

Key fob, car remote, clicker thingy, key bob? We've heard it called just about everything under the sun. No matter what you call it, one thing is certain: life is just a little bit sweeter when you can lock and unlock your car with the push of a button. Let's face it, it's the 21st Century and no one has time to fumble with caveman technology trying to stick a key into a lock to get into their car. Once you receive your new key fob simply program it to your vehicle and you'll be sliding in and out of your car with ease just like the rest of the cool kids.  Questions? Call us at 402-964-2720

Programming Instructions

2007 Buick Rainier

You must have all remotes including working ones when performing this procedure.


1. Close all doors.


2. Insert key into the ignition.


3. Press and hold the power UNLOCK button on driver's side door panel. Do not release until instructed to do so in step 5.


4. Quickly turn the ignition ON, OFF, ON, OFF. (ON is the position just shy of starting your vehicle, OFF is the position where you can remove your key)


5. Release the power unlock button on the driver's side door panel. The vehicle should respond by locking and unlocking automatically. If locks cycle then continue to step 6.  If the door locks begin to lock and unlock BEFORE releasing the unlock button then the vehicle has not entered programming mode and you must start over. Remove key, open door and return to step 1.  If the vehicle continues to lock and unlock before releasing the unlock button then there is a problem with the vehicles system and remotes must be programmed by a certified professional. If you are unable to get the door locks to cycle then you are turning the key too quick, too slow, there's a problem with the vehicles system, or the vehicle is not equipped with a factory keyless entry system.


6. Hold the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds.


7. NOW repeat step 6. For all additional remotes including working ones.


8. After step 6. has been performed for all remotes TURN ignition to ON to exit programming mode.


9. Turn ignition to OFF, remove key and test all remotes.


Share your knowledge of this product. Be the first to write a review »