Home > Chevrolet > Express 3500 > 2008 >

NEW 2008 Chevrolet Express 3500 Keyless Entry Key Fob Remote Free Program Ins
New Key Fob Remote For a 2008 Chevrolet Express 3500 w/ 3 Buttons & Programming
 
Alternative Views:


List Price: $109.95
Our Price: $29.77
Savings: $80.18
FCCID: Model / FCC ID: OUC60270
Battery Size CR2032
Note: Batteries sold separately

Quantity in Stock:8

Availability:: Ships Next Business Day
Product Code: 2008-CHEVY-EXPRESS35-OUC3B-FOB
Qty:

 
 
THIS IS A BRAND NEW REMOTE.  ALL OF OUR ITEMS HAVE BEEN TESTED AND WE OFFER A 100% MONEY BACK GUARANTEE, SO PURCHASE WITH CONFIDENCE AND NO RISK!

VEHICLE:  2008 CHEVROLET EXPRESS 3500    
PROGRAMMING INSTRUCTIONS:  GOOD NEWS!  THIS REMOTE IS SELF-PROGRAMMABLE, NO PROFESSIONAL NEEDED.  THERE ARE TWO DIFFERENT PROCEDURES FOR THIS KEY FOB.  IF YOU HAVE THE DRIVER INFORMATION CENTER IN YOUR VEHICLE THEN YOU WILL REQUIRE PROCEDURE #1.  IF YOU DO NOT HAVE THE DRIVER INFORMATION CENTER IN YOUR VEHICLE THEN YOU WILL REQUIRE PROCEDURE #2.  PLEASE SEE BELOW FOR COMPLETE PROGRAMMING INSTRUCTIONS
KEY FOB INCLUDES NEW BATTERY
WE HAVE PHONE SUPPORT:  402-964-2720
This is a Brand New Keyless Entry Remote KEY FOB for a 2008 Chevrolet Express 3500. This Key FOB fits many other vehicles, please see listing for list of compatible vehicles.  
There are different button configurations for this key fob.  Please Note: Your current working key fob needs to have the same button configuration as the one in the picture.  If it DOES NOT look like the picture then this key fob will not work for your vehicle.  
Sound confusing? We know that these key fobs can be difficult.  That is why we are giving you this! OUR PHONE NUMBER 402-964-2720! I mean who does that anymore?  We Do!  We are here for you from your purchase to programming! 
  • Please also note you will need to program the remote to your vehicle, the remote will not just show up and work.  
     
  • We ship United State Postal Service First Class mail and have items shipped within 1 business day. Please email with questions. 100% Money Back Guarantee!

  • PROGRAMMING INSTRUCTIONS FOR 2008 CHEVROLET EXPRESS 3500

    PROCEDURE #1
    THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.

    1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

    2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

    3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.

    4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

    5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

    6. To exit programming mode turn ignition OFF, remove key and test all remotes.

    PROCEDURE #2
    THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.

    1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

    2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

    3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

    4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

    5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

    6. To exit programming mode turn ignition OFF, remove key and test all remotes.



Share your knowledge of this product. Be the first to write a review »