Home > Chrysler > Sebring > 2009 >

New Keyless Entry Remote Key Fob For a 2009 Chrysler Sebring w/ Programming
New Keyless Entry Remote Key Fob For a 2009 Chrysler Sebring w/ Programming
 
Our Price: $32.77
FCCID: OHT692427AA and KOBDT04A
Battery Size CR2032
Note: Batteries sold separately

Quantity in Stock:6


Availability:: Ships Next Business Day
Product Code: 2009-CHRYSLER-SEBRING-KEY
Qty:

 
Item Specifics

Compatible with: 2009 Chrysler Sebring

Bring your 2009 Chrysler Sebring out of the dark ages and back into the modern era!

Key fob, car remote, clicker thingy, key bob… We've heard it called just about everything under the sun. No matter what you call it, one thing is certain: life is just a little bit sweeter when you can lock and unlock your car with the push of a button. Let's face it, it's the 21st Century and no one has time to fumble with caveman technology trying to stick a key into a lock to get into their car. Once you receive your new key fob simply program it to your vehicle and you'll be sliding in and out of your car with ease just like the rest of the cool kids.

Questions?




Programming Instructions

Click Here for Programming Instructions
Programming Instructions
  • KEY FOB PROGRAMMING INSTRUCTIONS
    PLEASE NOTE: THIS PROCEDURE CAN ONLY BE USED ON VEHICLES BUILT IN USA. YOU MUST HAVE TWO WORKING PROGRAMMED REMOTE/KEYS BEFORE YOU CAN ADD A THIRD REMOTE/KEY. IF YOU ONLY HAVE ONE WORKING REMOTE/KEY AND WANT TO ADD A SECOND KEY THIS PROCEDURE WILL NOT WORK AND YOU WILL HAVE TO GET IT PROGRAMMED BY A LOCKSMITH, MECHANIC, OR DEALER.
    1. Using first programmed remote/key turn ignition to the ON position
    for 5 seconds. (Do not crank engine). Turn remote/key off and remove.
    2. Within 5 seconds insert second working programmed remote/key.
    Turn ignition to the ON position (Do not crank engine) security light
    will begin to flash and chime will be heard within 10 seconds. Turn
    remote/key off and remove. NOTE: Some vehicles will not chime,
    only the security light will flash.
    3. Within 5 seconds insert third NEW CUT remote/key and turn ignition to
    the ON position (Do not crank engine). The security light should start
    flashing and within 10 seconds you should hear a chime and the
    security light should go out. Once the security light goes out, the new
    remote/key should be programmed. Turn remote/key to the OFF
    position, remove key.
    4. Test key and remote.

Share your knowledge of this product. Be the first to write a review »