THIS REMOTE IS SELF PROGRAMMABLE, HOWEVER THERE VERY SPECIFIC REQUIREMENTS IN ORDER TO SELF-PROGRAM THIS REMOTE TO YOUR VEHICLE PLEASE READ INFORMATION BELOW VERY CAREFULLY.
IF YOU HAVE LOST ALL OF YOUR REMOTES/KEYS AND DO NOT HAVE AT LEAST TWO WORKING REMOTE/KEY COMBO'S, YOU WILL NEED TO TAKE THE KEY AND REMOTE YOU PURCHASE FROM US TO A PROFESSIONAL (LOCKSMITH, MECHANIC, OR DEALER) TO HAVE IT PROGRAMMED. THEY WILL CHARGE YOU FOR THIS, SO PLEASE CALL AHEAD OF TIME SO YOU KNOW THE EXTRA COST INVOLVED TO SYNC THE KEY TO YOUR VEHICLE.
SELF-PROGRAMMING INSTRUCTIONS ARE LISTED BELOW.
CONFUSING? YEAH, WE KNOW, BUT THAT IS WHY WE ARE GIVING YOU THIS 402-964-2720, OUR PHONE NUMBER. CALL US WITH QUESTIONS, WE ARE HERE TO HELP AND WANT TO MAKE SURE YOU ARE COMFORTABLE WITH YOUR PURCHASE.
KEY FOB PROGRAMMING INSTRUCTIONS
PLEASE NOTE: THIS PROCEDURE CAN ONLY BE USED ON VEHICLES BUILT IN USA. YOU MUST HAVE TWO WORKING PROGRAMMED REMOTE/KEYS BEFORE YOU CAN ADD A THIRD REMOTE/KEY. IF YOU ONLY HAVE ONE WORKING REMOTE/KEY AND WANT TO ADD A SECOND KEY THIS PROCEDURE WILL NOT WORK AND YOU WILL HAVE TO GET IT PROGRAMMED BY A LOCKSMITH, MECHANIC, OR DEALER.
1. Using first programmed remote/key turn ignition to the ON position
for 5 seconds. (Do not crank engine). Turn remote/key off and remove.
2. Within 5 seconds insert second working programmed remote/key.
Turn ignition to the ON position (Do not crank engine) security light
will begin to flash and chime will be heard within 10 seconds. Turn
remote/key off and remove. NOTE: Some vehicles will not chime,
only the security light will flash.
3. Within 5 seconds insert third NEW CUT remote/key and turn ignition to
the ON position (Do not crank engine). The security light should start
flashing and within 10 seconds you should hear a chime and the
security light should go out. Once the security light goes out, the new
remote/key should be programmed. Turn remote/key to the OFF
position, remove key.
4. Test key and remote.
Good