PLEASE NOTE: THIS PROCEDURE CAN ONLY BE USED ON VEHICLES BUILT IN USA. YOU MUST HAVE TWO WORKING PROGRAMMED REMOTE/KEYS BEFORE YOU CAN ADD A THIRD REMOTE/KEY. IF YOU ONLY HAVE ONE WORKING REMOTE/KEY AND WANT TO ADD A SECOND KEY THIS PROCEDURE WILL NOT WORK AND YOU WILL HAVE TO GET IT PROGRAMMED BY A LOCKSMITH, MECHANIC, OR DEALER.
1. Using first programmed remote/key turn ignition to the ON position
for 5 seconds. (Do not crank engine). Turn remote/key off and remove.
2. Within 5 seconds insert second working programmed remote/key.
Turn ignition to the ON position (Do not crank engine) security light
will begin to flash and chime will be heard within 10 seconds. Turn
remote/key off and remove. NOTE: Some vehicles will not chime,
only the security light will flash.
3. Within 5 seconds insert third NEW CUT remote/key and turn ignition to
the ON position (Do not crank engine). The security light should start
flashing and within 10 seconds you should hear a chime and the
security light should go out. Once the security light goes out, the new
remote/key should be programmed. Turn remote/key to the OFF
position, remove key.
4. Test key and remote.
